• ProctorVent Over Fascia Vent 25mm (20 linear metre) - Tight House
  • ProctorVent Over Fascia Vent 25mm (20 linear metre) - Tight House
  • ProctorVent Over Fascia Vent 25mm (20 linear metre) - Tight House
1 3

Proctor

ProctorVent Over Fascia Vent 25mm (20 linear metre)

ProctorVent Over Fascia Vent 25mm (20 linear metre)

$212.00 AUD
$212.00 AUD
Sale Sold out
Tax included. Shipping calculated at checkout.

The Over Fascia Vent 25mm (FV25) is the most practical and cost efficient method of ventilating the eaves. It is easy to install, discrete and is compatible with either timber of metal fascias.

Features and Benefits

  • ProctorVent Over Fascia Vents provide for the following free open area per linear metre.
    • FV25 : 25,000mm² /Lm
  • Assists as part of a passive roof ventilation system in releasing heat from the roof space.
  • Will dramatically reduce condensation risk as part of the complete ProctorVent roof ventilation system.
  • Forms part of a passive ventilation system that works year round with no moving parts or energy consumption.
  • Easy to install.
  • Discretely hidden behind the gutter.
  • Insect proof - 4mm apertures prevent ingress of nesting insects.
  • Comes in 20 linear metres per box

Applications / Scope of use

  • In accordance with the requirements of NCC 2019 ventilation of roof spaces, NCC 2022 roof space ventilation, or CBOS Condensation in Buildings – Tasmanian Designers’ Guide - Ver. 2
  • Suitable for new builds or renovations as part of the ProctorVent system.
  • For metal and tiled roof installations.
  • Compatible with timber or metal fascia.
  • To ensure continuous and unimpeded airflow past the insulation, should be used in conjunction with the ProctorVent Eaves Baffle Vent (RR650) for traditional roofs and/or the ProctorVent Vented Batten (VB20) for cathedral roofs.


Installation

  • ProctorVent FV25/FV10 should be screw fixed (for metal fascia) or nail fixed (for timber fascia) to the top of the fascia board through the fixing holes provided along the full length of the eaves.
  • Ensure screws meet metal facia manufactures warranty requirements.
  • FV25/FV10 over fascia vents are located above the fascia, under the sarking membrane and where applicable with an eaves flashing above the over fascia vent.
  • The over fascia vents butt up to each other along
    the entire run of fascia.
  • FV25/FV10 over fascia vents may require some adjustment to fascia or roof heights depending on the type of over fascia vent selection, the type of fascia and/or the combination of ProctorVent products being installed.

Please refer to ProctorVent FV10/25 PDS here

Physical weight: 4kg

Cubic weight (for shipping): 11kg

View full details